SPECIFICATIONS	MEP 95-501A NSN: 6115-01-435-1567	MEP 95-531A NSN: 6115-01-435-1565
Power Output	2 kW	2 kW
Voltage	28 VDC	120 VAC
Quality Power	< 5.0% Ripple	< 12% Deviation Factor
Weight	140 lbs. with 4 hours of fuel	152 lbs. with 4 hours of fuel
Dimensions	29.5” x 16.0” x 21.7”
Engine	Single Cylinder Air-cooled Diesel Engine
Fuel	JP-8, DL-2, DF2
Operating Temperature	-32ºC (-25ºF) To 49ºC (120ºF)
Additional Features	Recoil Manual Start Electric Start with NATO Slave EMI Suppressed Military Technical Manual Complete Logistic Support

TEST	SPECIFICATIONS
Insulation resistance test	>2000 M ohm
High potential test	1500 VDC, 1 min.
Winding resistance test	<5% variation
Start and stop test	14 sec./4 sec.
Circuit interrupter test (short circuit)	0.34 sec.
Circuit interrupter test (overload current)	<110 sec. @ 125% Load
Low oil pressure protective device test	12-15 psi
Instrument Accuracy	Voltmeter <± 3% Load meter <± 5% Rated load Freq Meter (Mode III) <± 1% Rated freq
Voltage waveform test (harmonic analysis, Mode III sets only)	Deviation Factor <16% Frequency Harmonics <15%
Frequency (Speed) and voltage stability test (long-term)	Mode III <4% Mode IV  <2%
Maximum power test	2.0 kW continuous , 2.1 KW Minimum 2 hrs.
Ripple voltage test (Mode IV sets only)	<7%
Noise level test	<79 dBA
Maintainability	<0.033
Reliability test	1000 hours min.
Endurance test	1000 hours
Starting and operating test (moderate cold electric start)	-32ºC(-25ºF), 5 min.
Starting and operating test (moderate cold manual crank)	-5ºC(+23ºF), 5 min.
High temperature test	+49ºC(+120ºF)
Humidity test	5 cycles of 48 hrs @ 95%
Electromagnetic interference (UM04)	RE02, CE04, RS03
Extreme Cold Storage	-54º C (-65º F)
Frequency Regulation	<5.6%
Voltage Regulation	<4%